3M™ Cushion-Mount™ Plus Plate Mounting Tape E1720, Green 457mm
Dimensions : 33m
Mount your photopolimeric plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1520. Our 0.51 mm white, double coated foam tape has the air release feature with easy plate side removal. It is used for high speed printing with fine type reverses and expanded colour gamut.
- Purple, flexo plate mounting tape with air release feature adhesive
- 0.51 mm thickness
- Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
- Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1520 with easy mount adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality for the high speed printing with fine type reverses and expanded colour gamut.
Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate.
The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting.
The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application when mounting and clean removability while demounting.
Recommendation for implementation
- For mounting photopolimeric plates to print cylinders or sleeves